Home > products > pumps > jhonson > KGE
The KGE is a self-priming centrifugal pump with radial (semi-open or closed) impeller, overhung mounted on a bearing pedestal. If a spacer type coupling is used, the pump can easily be dismantled without it being necessary to disturb the piping or to move the motor The KGE series is available in different drive possibilities:
KGE: pump with bare shaft for clockwise rotation
KGEL: pump with bare shaft for counter-clockwise rotation
KGEF: pump with flanged motor (close coupled)
Max. Capacity 100 m3/h
Max. Head 60 m/h
Max. Working Pressure 800 kPa (8 bar)
Max. Temperature 95 °C
Max. Speed 3600 rpm
Materials Cast Iron
Self-priming.
Suitable for a wide range of duties.
Non-return valve mounted.
Oil bath for the mechanical seal (preventing seal from running dry).
Dust tight, grease lubricated bearings.